FT-20 Fiber Laser Marking Machine with high precision
Features:
Air cooled cooling system
easy and quickly installation,
USB contacted with any computer and install softerware easily .
Use interfaces types: text, graphics, serial number, serial number,
a d bar code, 2 d barcode, successive signet (optional equipments),
etc
Suitable for: anodized sculpture, hand tools deep carved, aluminum a deep
carved, stainless steel surface carved black, IC table sculpture,
etc.!
Applicable Materials
Many type of metals:Gold,silver,stainless
steel,copper,Aluminum,Chrome Brass,etc
Alloy and metal oxides:Anodized Aluminum
Some non-metal materials&special surface treatment:silicon
wafer,ceramics,plastic,rubber,epoxy resin,ABS,Printing
ink,Plating,Spraying,Coating film
Advantages:
1. There is cooperation between high speed and galvanometer.
2. It has small volume which is 10KG only.
3. Power consumption is less than 500W with low electricity
sonsumption and without consumable items.
4. There is no need to use water chillers because air cooling is
enough for reducing energy consumption.
5. The bad working environment and change of temperature have no
influence on this machine.It can work under condition of power cut
by using storage battery and car cigarette lighter.
6 reduces cost of depreciation ,which meets demand of large scale
and stable production for customers.
Technical parameter:
Model | FT-20 Fiber laser making machine |
Laser type | Ytterbium Fiber |
Operation type | Q-switched |
Laser power | 20w,10w |
Pulse wave frequency | 20-80khz |
Each pulse energy(mj) | 0.51 |
Laser wavelength | 1060～1070 |
Laser beam | <1.2 |
Marking range | 100*100(mm) /200*200(mm) |
Marking line width | <0.01mm |
One time marking depth | <0.3mm |
Mark speed | 15000mm/s |
Smallest letter | 0.1mm |
Resetting positioning accuracy | 0.001mm |
Whole machine power | <800w |
Working voltage | AC 220V,50HZ |
Fiber laser life | 100000 hours |
Cooling mode | Air cooling |
